Stripping is not the only option in restoring the original luster to furniture especially if you live in Austin city, TX. An alternative is available which ensures preservation of the veneer and original finish character. The good news is that furniture restoration Austin have come up with easy tips to aid you in retaining the beauty of your antique wood-piece.
Wiping on mineral spirits will help you determine the next step. This works to give you an insight on how the furniture looks like with just but a coat of clear finish. Do thorough cleaning as a first step to restore the wood-piece. The recommended agent for cleaning is a mixture of water and dish soap made from liquid ivory. This should be in the same proportion as in dish washing. The process of cleaning involves gently scrubbing the furniture surface using a sponge dipped into the solution and squeezed off the extra solution. Carvings and molded parts are better cleaned using a paint brush.
White rings can be removed by using petroleum jelly. Special removers can be used too. The petroleum jelly is slathered on the ring and allowed to sit for a night. Oil from the jelly penetrates the finish removing the ring or making it less pronounced.
Delicate paint removers are used to scrap the paint taking care not to damage the finish. This can be made from razor and masking tape pieces whereby the tapes are wrapped round the blades and bend to curve. The damage is then filled with epoxy after thoroughly mixing epoxy putty. Its placed inside area that needs repair. If you find out that there are any absent veneer or chipped wood or even damaged molding, fix using the putty too.
If there is missing wood, replace it. The epoxy hardens in a few hours. After it is hardened, sand and color the repaired part. Balance the new part with the surrounding through painting with gel stain. This will match its color with that of existing wood. Make a choice of two colors which are similar to the bright and darkened parts of wood piece. Blend the two to create a variety of colors.
Gel stain is then worked onto the surface and the excess wiped. It does not remove dark stains left by water or reduce the effects, but rather hides fine scratches and hue where finish has worn out.
If there are nail holes or small cracks after final finish has been applied, they are filled using fill wax sticks which are colored, repair wax sticks or fill pencils. Small indentations are eliminated by wetting them. Moisture makes the crumpled fibers of wood to swell back to the original shape. However, it should be noted that it is a must for the moisture to penetrate into the wood if this is to work.
Finally all these come to completion after wiping on a finishing coat. The importance of this is to bring back the sheen and protection of the furniture surface. One can use any wipe to finish the work.
Wiping on mineral spirits will help you determine the next step. This works to give you an insight on how the furniture looks like with just but a coat of clear finish. Do thorough cleaning as a first step to restore the wood-piece. The recommended agent for cleaning is a mixture of water and dish soap made from liquid ivory. This should be in the same proportion as in dish washing. The process of cleaning involves gently scrubbing the furniture surface using a sponge dipped into the solution and squeezed off the extra solution. Carvings and molded parts are better cleaned using a paint brush.
White rings can be removed by using petroleum jelly. Special removers can be used too. The petroleum jelly is slathered on the ring and allowed to sit for a night. Oil from the jelly penetrates the finish removing the ring or making it less pronounced.
Delicate paint removers are used to scrap the paint taking care not to damage the finish. This can be made from razor and masking tape pieces whereby the tapes are wrapped round the blades and bend to curve. The damage is then filled with epoxy after thoroughly mixing epoxy putty. Its placed inside area that needs repair. If you find out that there are any absent veneer or chipped wood or even damaged molding, fix using the putty too.
If there is missing wood, replace it. The epoxy hardens in a few hours. After it is hardened, sand and color the repaired part. Balance the new part with the surrounding through painting with gel stain. This will match its color with that of existing wood. Make a choice of two colors which are similar to the bright and darkened parts of wood piece. Blend the two to create a variety of colors.
Gel stain is then worked onto the surface and the excess wiped. It does not remove dark stains left by water or reduce the effects, but rather hides fine scratches and hue where finish has worn out.
If there are nail holes or small cracks after final finish has been applied, they are filled using fill wax sticks which are colored, repair wax sticks or fill pencils. Small indentations are eliminated by wetting them. Moisture makes the crumpled fibers of wood to swell back to the original shape. However, it should be noted that it is a must for the moisture to penetrate into the wood if this is to work.
Finally all these come to completion after wiping on a finishing coat. The importance of this is to bring back the sheen and protection of the furniture surface. One can use any wipe to finish the work.
About the Author:
You can visit www.leatherfixaustin.com for more helpful information about Ideas On Furniture Restoration Austin.
